Twin-Wire Tube Pin Connectors
Color
-
Black(1)
-
Blue(1)
-
Red(1)
Wire Size
-
#14(1)
-
#16(1)
-
#18(1)
- Information:
- Use Tube PinConnectors over common ferrules.
- Tube Pins provide the following advantages in three different Tube Pin Connector Types: Insulated, Non-insulated and Twin Wire. EASY wire insertion in a terminal block clamp, specifically smaller gauge (24 through 18 awg).
- NO unwanted wire contacts.
- Tube Pin Connectors eliminate the possibility that strands might accidentally touch another unit creating a poor connection or even power shortages.
- NO spreading of strands after the wire is clamped into a terminal block or any other component.
- NO fraying of strands, particularly in cases where the wire is very small or is removed often from its housing for testing purposes.
- Use Tube Pin connectors in place of tinning wire.
- PERMANENT crimping of two (jumper connection) wires before insertion in the wire clamp (Twin Wire Tube Pin Connectors).
- PERFECT for terminating wire in “High Density” areas where lack of space makes it difficult to break connections, such as brick units or PLC’s.
- Instructions:
- 1. Insert cleaned wire into the insulated end of the Tube Pin connector.
- 2. Using crimp tool, place the metal shaft in the tool’s appropriate spot and crimp.
- 3. Insert the crimped Tube Pin connector into the terminal block.
- 4. Tighten the Tube Pin connector and wire into the terminal block.
